EEBus: drop redundant Scenario middle word from constant names (#29704)

server/eebus/scenarios.go

@@ -11,62 +11,62 @@ package eebus
 
 // MGCP — Monitoring of Grid Connection Point (UC TS v1.0.0)
 const (
-	MGCPScenarioPowerFactor     uint = 1 // S1 power factor (cos phi)
-	MGCPScenarioPower           uint = 2 // S2 active power per phase + total
-	MGCPScenarioEnergyFeedIn    uint = 3 // S3 total feed-in energy
-	MGCPScenarioEnergyConsumed  uint = 4 // S4 total consumed energy
-	MGCPScenarioCurrentPerPhase uint = 5 // S5 phase-specific currents
-	MGCPScenarioVoltagePerPhase uint = 6 // S6 phase-specific voltages
-	MGCPScenarioFrequency       uint = 7 // S7 frequency
+	MGCPPowerFactor     uint = 1 // S1 power factor (cos phi)
+	MGCPPower           uint = 2 // S2 active power per phase + total
+	MGCPEnergyFeedIn    uint = 3 // S3 total feed-in energy
+	MGCPEnergyConsumed  uint = 4 // S4 total consumed energy
+	MGCPCurrentPerPhase uint = 5 // S5 phase-specific currents
+	MGCPVoltagePerPhase uint = 6 // S6 phase-specific voltages
+	MGCPFrequency       uint = 7 // S7 frequency
 )
 
 // MPC — Monitoring of Power Consumption (UC TS v1.0.0)
 const (
-	MPCScenarioPower           uint = 1 // S1 active power per phase + total
-	MPCScenarioEnergyConsumed  uint = 2 // S2 total consumed energy
-	MPCScenarioCurrentPerPhase uint = 3 // S3 phase-specific currents
-	MPCScenarioVoltagePerPhase uint = 4 // S4 phase-specific voltages
-	MPCScenarioFrequency       uint = 5 // S5 frequency
+	MPCPower           uint = 1 // S1 active power per phase + total
+	MPCEnergyConsumed  uint = 2 // S2 total consumed energy
+	MPCCurrentPerPhase uint = 3 // S3 phase-specific currents
+	MPCVoltagePerPhase uint = 4 // S4 phase-specific voltages
+	MPCFrequency       uint = 5 // S5 frequency
 )
 
 // LPC — Limitation of Power Consumption (UC TS v1.0.0). Same scenario layout for CS and EG roles.
 const (
-	LPCScenarioLimit                uint = 1 // S1 LoadControl: consumption limit
-	LPCScenarioFailsafe             uint = 2 // S2 DeviceConfiguration: failsafe values
-	LPCScenarioHeartbeat            uint = 3 // S3 DeviceDiagnosis: heartbeat
-	LPCScenarioElectricalConnection uint = 4 // S4 ElectricalConnection (optional)
+	LPCLimit                uint = 1 // S1 LoadControl: consumption limit
+	LPCFailsafe             uint = 2 // S2 DeviceConfiguration: failsafe values
+	LPCHeartbeat            uint = 3 // S3 DeviceDiagnosis: heartbeat
+	LPCElectricalConnection uint = 4 // S4 ElectricalConnection (optional)
 )
 
 // LPP — Limitation of Power Production (UC TS v1.0.0). Same scenario layout for CS and EG roles.
 const (
-	LPPScenarioLimit                uint = 1 // S1 LoadControl: production limit
-	LPPScenarioFailsafe             uint = 2 // S2 DeviceConfiguration: failsafe values
-	LPPScenarioHeartbeat            uint = 3 // S3 DeviceDiagnosis: heartbeat
-	LPPScenarioElectricalConnection uint = 4 // S4 ElectricalConnection (optional)
+	LPPLimit                uint = 1 // S1 LoadControl: production limit
+	LPPFailsafe             uint = 2 // S2 DeviceConfiguration: failsafe values
+	LPPHeartbeat            uint = 3 // S3 DeviceDiagnosis: heartbeat
+	LPPElectricalConnection uint = 4 // S4 ElectricalConnection (optional)
 )
 
 // OPEV — Overload Protection by EV Charging Current Curtailment (UC TS v1.0.1)
 const (
-	OPEVScenarioObligationLimit uint = 1 // S1 LoadControl + ElectricalConnection
-	OPEVScenarioChargingState   uint = 2 // S2 charging state
-	OPEVScenarioChargingPlan    uint = 3 // S3 charging plan
+	OPEVObligationLimit uint = 1 // S1 LoadControl + ElectricalConnection
+	OPEVChargingState   uint = 2 // S2 charging state
+	OPEVChargingPlan    uint = 3 // S3 charging plan
 )
 
 // OSCEV — Optimization of Self-Consumption during EV Charging (UC TS v1.0.1)
 const (
-	OSCEVScenarioRecommendationLimit uint = 1 // S1 LoadControl + ElectricalConnection
-	OSCEVScenarioChargingState       uint = 2 // S2 charging state
-	OSCEVScenarioChargingPlan        uint = 3 // S3 charging plan
+	OSCEVRecommendationLimit uint = 1 // S1 LoadControl + ElectricalConnection
+	OSCEVChargingState       uint = 2 // S2 charging state
+	OSCEVChargingPlan        uint = 3 // S3 charging plan
 )
 
 // EVCEM — Measurement of Electricity during EV Charging (UC TS v1.0.1)
 const (
-	EVCEMScenarioPowerPerPhase uint = 1 // S1 phase-specific active power + ElectricalConnection (currents)
-	EVCEMScenarioPowerTotal    uint = 2 // S2 total active power only
-	EVCEMScenarioEnergy        uint = 3 // S3 charging energy summary
+	EVCEMPowerPerPhase uint = 1 // S1 phase-specific active power + ElectricalConnection (currents)
+	EVCEMPowerTotal    uint = 2 // S2 total active power only
+	EVCEMEnergy        uint = 3 // S3 charging energy summary
 )
 
 // EVSOC — EV State of Charge (UC TS v1.0.0 RC1)
 const (
-	EVSOCScenarioStateOfCharge uint = 1 // S1 state of charge
+	EVSOCStateOfCharge uint = 1 // S1 state of charge
 )