From b4a882ffe8e62f9bcddd92071d805627dea8f6c1 Mon Sep 17 00:00:00 2001 From: andig Date: Sun, 7 Mar 2021 18:40:22 +0100 Subject: [PATCH] Document Fritz!DECT --- README.md | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 5080d0eac..5cbbc024a 100644 --- a/README.md +++ b/README.md @@ -15,7 +15,7 @@ EVCC is an extensible EV Charge Controller with PV integration implemented in [G ## Features - simple and clean user interface -- multiple [chargers](#charger): Wallbe, Phoenix (includes ESL Walli), go-eCharger, NRGkick (direct Bluetooth or via Connect device), SimpleEVSE, EVSEWifi, KEBA/BMW, openWB, Mobile Charger Connect, and any other charger using scripting +- multiple [chargers](#charger): Wallbe, Phoenix (includes ESL Walli), go-eCharger, NRGkick (direct Bluetooth or via Connect device), SimpleEVSE, EVSEWifi, KEBA/BMW, openWB, Mobile Charger Connect, Fritz!DECT outlets and any other charger using scripting - multiple [meters](#meter): ModBus (Eastron SDM, MPM3PM, SBC ALE3 and many more), Discovergy (using HTTP plugin), SMA Sunny Home Manager and Energy Meter, KOSTAL Smart Energy Meter (KSEM, EMxx), any Sunspec-compatible inverter or home battery devices (Fronius, SMA, SolarEdge, KOSTAL, STECA, E3DC, ...), Tesla PowerWall - wide support of vendor-specific [vehicles](#vehicle) interfaces (remote charge, battery and preconditioning status): Audi, BMW, Ford, Hyundai, Kia, Nissan, Porsche, Renault, Seat, Skoda, Tesla, Volkswagen, Volvo and any other connected vehicle using scripting - [plugins](#plugins) for integrating with hardware devices and home automation: Modbus (meters and grid inverters), HTTP, MQTT, Javascript, WebSockets and shell scripts @@ -176,14 +176,15 @@ Charger is responsible for handling EV state and adjusting charge current. Avail - `go-e`: go-eCharger chargers (both local and cloud API are supported, at least firmware 040.0 required) - `keba`: KEBA KeContact P20/P30 and BMW chargers (see [Preparation](#keba-preparation-)) - `mcc`: Mobile Charger Connect devices (Audi, Bentley, Porsche) +- `nrgkick-bluetooth`: NRGkick chargers with Bluetooth connector (Linux only, not supported on Docker) +- `nrgkick-connect`: NRGkick chargers with additional NRGkick Connect module - `openWB`: openWB chargers using openWB's MQTT interface - `phoenix-em-eth`: chargers with Phoenix **EM**-CP-PP-**ETH** controllers - `phoenix-ev-eth`: chargers with Phoenix **EV**-CC-\*\*\*-**ETH** controllers (see [Preparation](#phoenix-emev-ethernet-controller-preparation-)) - `phoenix-ev-ser`: chargers with Phoenix **EV**-CC-\*\*\*-**SER** serial controllers (Modbus RTU) -- `nrgkick-bluetooth`: NRGkick chargers with Bluetooth connector (Linux only, not supported on Docker) -- `nrgkick-connect`: NRGkick chargers with additional NRGkick Connect module - `simpleevse`: chargers with SimpleEVSE controllers connected via ModBus (e.g. OpenWB Wallbox, Easy Wallbox B163, ...) - `wallbe`: Wallbe Eco chargers (see [Preparation](#wallbe-preparation-)). For older Wallbe boxes (pre 2019) with Phoenix EV-CC-AC1-M3-CBC-RCM-ETH controllers make sure to set `legacy: true` to enable correct current configuration. +- `fritzdect`: pseudo charger using Fritz!DECT 200/210 outlets - `default`: default charger implementation using configurable [plugins](#plugins) for integrating any type of charger Configuration examples are documented at [andig/evcc-config#chargers](https://github.com/andig/evcc-config#chargers)