Intro = "The next steps will guide you through the creation of a configuration file for evcc.\nPlease note that this process cannot cover all possible scenarios.\nYou can cancel the process by pressing CTRL-C anytime.\n\nNOTE: This functionality is in an experimental state!\n  This means that the configuration file created may not work\n  in a future update of evcc and would need to be recreated.\n  We are looking forward to your feedback at https://github.com/evcc-io/evcc/discussions/\n\nLet's go:"
Flow_Mode = "In which mode should this process guide you through the configuration?"
Flow_Mode_Standard = "Standard mode (As simple and quick as possible)"
Flow_Mode_Advanced = "Advanced mode (Ask more details, requires technical know-how)"
Flow_Type = "What do you want to do?"
Flow_Type_NewConfiguration = "Create a new evcc configuration file"
Flow_Type_SingleDevice = "Configure a single device (has to be added manually to a configuration file!)"
Flow_NewConfiguration_Setup = "- Setup meters (house installation)"
Flow_NewConfiguration_Select = "Choose one of the following integrated PV systems, or '{{ .ItemNotPresent }}' if you have none of them"
Flow_SingleDevice_Setup = "- Setup a device"
Flow_SingleDevice_Select = "Choose one of the following device categories"
Flow_SingleDevice_Config = "The configuration:"
Flow_SMAHems_Setup = "- Setup SMA HEMS"
Flow_SMAHems_Add = "Do you want to connect your chargers to SMA Home Manager, so that it can consider them e.g. for controlling the in-house battery?"
ItemNotPresent = "My device is not in this list"
AddDeviceInCategory = "Do you want to add {{ .Article }} {{ .Category }}?"
AddAnotherDeviceInCategory = "Do you want to add {{ .Additional }} {{ .Category }}?"
AddLinkedDeviceInCategory = "Do you want to add a '{{ .Linked }}' device as {{ .Article }} {{ .Category }}?"
AddAnotherLinkedDeviceInCategory = "Do you want to add another '{{ .Linked }}' device as {{ .Article }} {{ .Category }}?"
Error = "Error: {{ .Error }}"
Error_ItemNotPresent = "Device not present"
Error_DeviceNotValid = "Device does not work"
Error_EEBUS_Certificate_Create = "Could not create the EEBUS certificate"
Error_EEBUS_Certificate_Use = "Could not process the generated EEBUS certificate"
File_Exists = "The file {{ .FileName }} already exists. Do you want to replace it?"
File_Permissions = "The file {{ .FileName }} already exists and can not be overwritten."
File_NewFilename = "Please provide a new filename"
File_Error_SaveFailed = "The configuration could not be saved in the file {{ .FileName }}"
File_SaveSuccess = "The configuration was successfully saved in the file {{ .FileName }}"
Choose = "Choose"
Category_ChargerTitle = "charger"
Category_ChargerArticle = "a"
Category_ChargerAdditional = "another"
Category_SystemTitle = "integrated PV system"
Category_SystemArticle = "an"
Category_SystemAdditional = "another"
Category_GridMeterTitle = "grid meter"
Category_GridMeterArticle = "a"
Category_GridMeterAdditional = "another"
Category_PVMeterTitle = "PV inverter (or corresponding meter)"
Category_PVMeterArticle = "a"
Category_PVMeterAdditional = "another"
Category_BatteryMeter = "battery inverter (or corresponding meter)"
Category_BatteryMeterArticle = "a"
Category_BatteryMeterAdditional = "another"
Category_ChargeMeterTitle = "charge meter"
Category_ChargeMeterArticle = "a"
Category_ChargeMeterAdditional = "another"
Category_VehicleTitle = "vehicle"
Category_VehicleArticle = "a"
Category_VehicleAdditional = "another"
TestingDevice_Title = "Testing the configuration of {{ .Device }} ..."
TestingDevice_TitleUsage = "Testing the {{ .Usage }} configuration of {{ .Device }} ..."
TestingDevice_RepeatStep = "Do you want to repeat choosing a device and configuring it?"
TestingDevice_AddFailed = "Testing {{ .Device }} failed. Do you want to add it anyway?"
TestingDevice_AddFailedUsage = "Testing of the {{ .Usage }} configuration of {{ .Device }} failed. Do you want to add {{ .Usage }} anyway?"
TestingMQTTFailed = "Testing the MQTT configuration failed. Do you want to repeat its configuration?"
Requirements_Title = "The device has the following requirements:"
Requirements_More = "Additional information:"
Requirements_Sponsorship_Title = "This device requires evcc sponsorship. Check the following link for what this is and how it works: https://docs.evcc.io/en/docs/sponsorship"
Requirements_Sponsorship_Optional_Title = "The development of evcc can be supported via sponsoring. Check the following link for what this is and how it works: https://docs.evcc.io/en/docs/sponsorship"
Requirements_Sponsorship_Feature_Title = "To use this feature evcc sponsorship is required. Check the following link for what this is and how it works: https://docs.evcc.io/en/docs/sponsorship"
Requirements_Sponsorship_Token = "Are you already a sponsor?"
Requirements_Sponsorship_Token_Input = "Please enter the sponsorship token"
Requirements_EEBUS_Cert_Error = "Error: The EEBUS certificate couldn't be created"
Requirements_EEBUS_Pairing = "You selected a charger which will be accessed via the EEBUS protocol.\nFor that, the charger must be connected to evcc. This can usually be done in the web interface of the charger.\nPlease press the enter key once you have started the process."
Config_Title = "Please provide the following settings:"
Config_ModbusInterface = "Choose the ModBus interface"
Config_AddAnotherValue = "Do you want to add another value?"
Config_Yes = "Yes"
Config_No = "No"
Cancel = "The configuration was cancelled.\n\nIf this guided configuration process doesn't work for you, please try the manual configuration. You can find more details about that on our website: https://docs.evcc.io/en/ \n"
InputError = "An input error occurred:"
Value_Choice = "Choose:"
Value_Help = "Help:"
Value_Required = "required"
Value_Optional = "optional"
Value_Sample = "Example"
ValueError_Invalid = "This value is invalid"
ValueError_Used = "This value is already in use."
ValueError_Empty = "The value may not be empty."
ValueError_Float = "The value must be a number."
ValueError_Number = "The value must be an integer."
ValueError_NumberLowerThanMin = "The value must be bigger or equal to {{ .Min }}."
ValueError_NumberBiggerThanMax = "The value must be smaller or equal to {{ .Max }}."
ValueError_Duration = "The value must include a duration. For example: 1s, 1m, 1h"
Device_Configure = "Configuration"
Device_Added = "was successfully added."
Loadpoint_Setup = "- Setup loadpoint(s), i.e. group of colocated chargers"
Loadpoint_Title = "Loadpoint title"
Loadpoint_AddAnother = "Do you want to add another loadpoint?"
Loadpoint_DefaultTitle = "Garage"
Loadpoint_ResetOnDisconnect = "Will disconnecting the charging cable from the vehicle reset the charging settings to the defaults?"
Loadpoint_WallboxWOMeter = "The system could not detect if the charger provides power data. Do you want to add an external meter instead?"
Loadpoint_WallboxMaxPower = "What is the maximum power your charger can provide?"
Loadpoint_WallboxMinAmperage = "What is the MINIMUM amperage your charger can provide on a single phase?"
Loadpoint_WallboxMaxAmperage = "What is the MAXIMUM amperage your charger can provide on a single phase?"
Loadpoint_WallboxPhases = "How many phases are connected to the charger?"
Loadpoint_WallboxPower36kW = "3.6 kW"
Loadpoint_WallboxPower11kW = "11 kW"
Loadpoint_WallboxPower22kW = "22 kW"
Loadpoint_WallboxPowerOther = "Other option"
Loadpoint_VehicleDisableAutoDetection = "Do you want to disable the automatic vehicle detection and assign a fixed vehicle? (Automatic detection does not work with offline vehicles!)"
Loadpoint_VehicleSelection = "Which vehicle should be assigned here?"
ChargeMode_Question = "What should be the default charging mode when a vehicle is connected?"
ChargeModeOff = "Off"
ChargeModeNow = "Now (charging with maximum power)"
ChargeModeMinPV = "Min+PV (charging with minimum power, faster if enough PV power surplus is available)"
ChargeModePV = "PV (Only with PV power surplus)"
ChargeModeNone = "None (Use what is set at the loadpoint)"
Site_Setup = "- Setup site"
Site_Title = "Site title"
Site_DefaultTitle = "My home"