1219 lines
48 KiB
JSON
1219 lines
48 KiB
JSON
{
|
|
"batterySettings": {
|
|
"batteryLevel": "Battery level",
|
|
"bufferStart": {
|
|
"above": "when above {soc}.",
|
|
"full": "when at {soc}.",
|
|
"never": "only with enough surplus."
|
|
},
|
|
"capacity": "{energy} of {total}",
|
|
"control": "Battery control",
|
|
"discharge": "Prevent discharge in fast mode and planned charging.",
|
|
"disclaimerHint": "Note:",
|
|
"disclaimerText": "These settings only affect solar mode. Charging behaviour is adjusted accordingly.",
|
|
"gridChargeTab": "Grid charging",
|
|
"legendBottomName": "Prioritize home battery charging",
|
|
"legendBottomSubline": "until it reaches {soc}.",
|
|
"legendMiddleName": "Prioritize vehicle charging",
|
|
"legendMiddleSubline": "when home battery is above {soc}.",
|
|
"legendTopAutostart": "Start automatically",
|
|
"legendTopName": "Battery-supported vehicle charging",
|
|
"legendTopSubline": "when home battery is above {soc}.",
|
|
"modalTitle": "Home Battery",
|
|
"usageTab": "Battery usage"
|
|
},
|
|
"config": {
|
|
"aux": {
|
|
"description": "Device that adjusts its consumption based on available surplus (like smart water heaters). evcc expects that this device reduces its power consumption if needed.",
|
|
"titleAdd": "Add Self-Regulating Consumer",
|
|
"titleEdit": "Edit Self-Regulating Consumer"
|
|
},
|
|
"battery": {
|
|
"titleAdd": "Add Battery",
|
|
"titleEdit": "Edit Battery"
|
|
},
|
|
"charge": {
|
|
"titleAdd": "Add Charge Meter",
|
|
"titleEdit": "Edit Charge Meter"
|
|
},
|
|
"charger": {
|
|
"chargers": "EV chargers",
|
|
"generic": "Generic integrations",
|
|
"heatingdevices": "Heating devices",
|
|
"ocppHelp": "Copy this address into your chargers configuration.",
|
|
"ocppLabel": "OCPP-Server URL",
|
|
"switchsockets": "Switchable sockets",
|
|
"template": "Manufacturer",
|
|
"titleAdd": {
|
|
"charging": "Add Charger",
|
|
"heating": "Add Heater"
|
|
},
|
|
"titleEdit": {
|
|
"charging": "Edit Charger",
|
|
"heating": "Edit Heater"
|
|
},
|
|
"type": {
|
|
"custom": {
|
|
"charging": "User-defined charger",
|
|
"heating": "User-defined heater"
|
|
},
|
|
"heatpump": "User-defined heat pump",
|
|
"sgready": "User-defined heat pump (sg-ready via plugins)",
|
|
"sgready-boost": "User-defined heat pump (sg-ready-boost, deprecated)",
|
|
"sgready-relay": "User-defined heat pump (sg-ready via relays)",
|
|
"switchsocket": "User-defined switch socket"
|
|
}
|
|
},
|
|
"circuits": {
|
|
"description": "Ensures, that the sum of all loadpoints connected to a circuit does not exceed the configured power and current limits. Circuits can be nested to build a hierarchy.",
|
|
"title": "Load Management",
|
|
"usableMeters": "Usable meter references"
|
|
},
|
|
"control": {
|
|
"description": "Usually the default values are fine. Only change them if you know what you are doing.",
|
|
"descriptionInterval": "Control loop update cycle in seconds. Defines how often evcc reads meter data, adjusts charging power and updates the UI. Short intervals (< 30s) can cause oscillations and unwanted behavior.",
|
|
"descriptionResidualPower": "Shifts the operation point of the control loop. If you have a home battery it's recommended to set a value of 100 W. This way the battery will get slight priority over grid use.",
|
|
"labelInterval": "Update interval",
|
|
"labelResidualPower": "Residual power",
|
|
"title": "Control behavior"
|
|
},
|
|
"deviceValue": {
|
|
"amount": "Amount",
|
|
"broker": "Broker",
|
|
"bucket": "Bucket",
|
|
"capacity": "Capacity",
|
|
"chargeStatus": "Status",
|
|
"chargeStatusA": "not connected",
|
|
"chargeStatusB": "connected",
|
|
"chargeStatusC": "charging",
|
|
"chargeStatusE": "no power",
|
|
"chargeStatusF": "error",
|
|
"chargedEnergy": "Charged",
|
|
"co2": "Grid CO₂",
|
|
"configured": "Configured",
|
|
"controllable": "Controllable",
|
|
"currency": "Currency",
|
|
"current": "Current",
|
|
"currentRange": "Current",
|
|
"dimmed": "Dimmed",
|
|
"enabled": "Enabled",
|
|
"energy": "Energy",
|
|
"feedinPrice": "Feed-in price",
|
|
"gridPrice": "Grid price",
|
|
"heaterTempLimit": "Heater limit",
|
|
"hemsActiveLimit": "Active limit",
|
|
"hemsType": "Communication",
|
|
"identifier": "RFID-Identifier",
|
|
"no": "no",
|
|
"odometer": "Odometer",
|
|
"org": "Organization",
|
|
"phaseCurrents": "Current L1, L2, L3",
|
|
"phasePowers": "Power L1, L2, L3",
|
|
"phaseVoltages": "Voltage L1, L2, L3",
|
|
"phases1p3p": "Phase switch",
|
|
"power": "Power",
|
|
"powerRange": "Power",
|
|
"range": "Range",
|
|
"singlePhase": "Single phase",
|
|
"soc": "Charge",
|
|
"solarForecast": "Solar forecast",
|
|
"temp": "Temperature",
|
|
"topic": "Topic",
|
|
"url": "URL",
|
|
"vehicleLimitSoc": "Charge limit",
|
|
"yes": "yes"
|
|
},
|
|
"deviceValueChargeStatus": {
|
|
"A": "A (not connected)",
|
|
"B": "B (connected)",
|
|
"C": "C (charging)"
|
|
},
|
|
"deviceValueHemsType": {
|
|
"eebus": "via EEBus",
|
|
"relay": "via Relay"
|
|
},
|
|
"devices": {
|
|
"auxMeter": "Smart consumer",
|
|
"batteryStorage": "Battery storage",
|
|
"consumer": "Consumer",
|
|
"solarSystem": "Solar system"
|
|
},
|
|
"editor": {
|
|
"loading": "Loading YAML editor…"
|
|
},
|
|
"eebus": {
|
|
"description": "Configuration that enables evcc to communicate with other EEBus devices.",
|
|
"title": "EEBus"
|
|
},
|
|
"ext": {
|
|
"description": "Records energy values of uncontrolled consumers (e.g. refrigerator, washing machine, etc.) for statistical purposes. These meters can also be used for load management (e.g. sub-distribution).",
|
|
"titleAdd": "Add Consumer Meter",
|
|
"titleEdit": "Edit Consumer Meter"
|
|
},
|
|
"form": {
|
|
"danger": "Danger",
|
|
"deprecated": "deprecated",
|
|
"example": "Example",
|
|
"optional": "optional"
|
|
},
|
|
"general": {
|
|
"applyAndClose": "Apply & close",
|
|
"cancel": "Cancel",
|
|
"close": "Close",
|
|
"customHelp": "Create a user-defined device using evcc's plugin system.",
|
|
"customOption": "User-defined device",
|
|
"delete": "Delete",
|
|
"docsLink": "See documentation.",
|
|
"dragHandle": "Drag handle",
|
|
"dragItem": "Draggable: {title}",
|
|
"dragList": "Reorderable list",
|
|
"experimental": "Experimental",
|
|
"forceSave": "Save anyway",
|
|
"hideAdvancedSettings": "Hide advanced settings",
|
|
"invalidFileSelected": "Invalid file selected",
|
|
"noFileSelected": "No file selected.",
|
|
"off": "off",
|
|
"on": "on",
|
|
"password": "Password",
|
|
"readFromFile": "Read from file",
|
|
"remove": "Remove",
|
|
"required": "required",
|
|
"reset": "Reset",
|
|
"save": "Save",
|
|
"saved": "Saved.",
|
|
"saving": "Saving…",
|
|
"selectFile": "Browse",
|
|
"showAdvancedSettings": "Show advanced settings",
|
|
"telemetry": "Telemetry",
|
|
"templateLoading": "Loading...",
|
|
"title": "Title",
|
|
"typeDeprecated": "The type '{type}' is outdated and will be removed in a future version. Please check the changelog and recreate this device.",
|
|
"validateSave": "Validate & save"
|
|
},
|
|
"grid": {
|
|
"title": "Grid meter",
|
|
"titleAdd": "Add Grid Meter",
|
|
"titleEdit": "Edit Grid Meter"
|
|
},
|
|
"hems": {
|
|
"description": "Power limitation by external systems (e.g. EnWG 14a controllers). Requires load management configuration.",
|
|
"title": "HEMS"
|
|
},
|
|
"icon": {
|
|
"change": "change",
|
|
"label": "Icon"
|
|
},
|
|
"influx": {
|
|
"description": "Writes charging data and other metrics to InfluxDB. Use Grafana or other tools to visualize the data.",
|
|
"descriptionToken": "Check the InfluxDB documentation to learn how to create one. https://docs.influxdata.com/influxdb/v2/admin/",
|
|
"labelBucket": "Bucket",
|
|
"labelCheckInsecure": "Allow self-signed certificates",
|
|
"labelDatabase": "Database",
|
|
"labelInsecure": "Certificate validation",
|
|
"labelOrg": "Organization",
|
|
"labelPassword": "Password",
|
|
"labelToken": "API Token",
|
|
"labelUrl": "URL",
|
|
"labelUser": "Username",
|
|
"title": "InfluxDB",
|
|
"v1Support": "Need support for InfluxDB 1.x?",
|
|
"v2Support": "Back to InfluxDB 2.x"
|
|
},
|
|
"loadpoint": {
|
|
"addCharger": {
|
|
"charging": "Add charger",
|
|
"heating": "Add heater"
|
|
},
|
|
"addMeter": "Add dedicated energy meter",
|
|
"cancel": "Cancel",
|
|
"chargerError": {
|
|
"charging": "Configuring a charger is required.",
|
|
"heating": "Configuring a heater is required."
|
|
},
|
|
"chargerLabel": {
|
|
"charging": "Charger",
|
|
"heating": "Heater"
|
|
},
|
|
"chargerPower11kw": "11 kW",
|
|
"chargerPower11kwHelp": "Will use a current range of 6 to 16 A.",
|
|
"chargerPower22kw": "22 kW",
|
|
"chargerPower22kwHelp": "Will use a current range of 6 to 32 A.",
|
|
"chargerPowerCustom": "other",
|
|
"chargerPowerCustomHelp": "Define a custom current range.",
|
|
"chargerTypeLabel": "Charger type",
|
|
"chargingTitle": "Behaviour",
|
|
"circuitHelp": "Load management assignment to ensure power and current limits are not exceeded.",
|
|
"circuitLabel": "Circuit",
|
|
"circuitUnassigned": "unassigned",
|
|
"defaultModeHelp": {
|
|
"charging": "Charging mode when connecting the vehicle.",
|
|
"heating": "Is set when on system start."
|
|
},
|
|
"defaultModeHelpKeep": "Keeps the last selected mode.",
|
|
"defaultModeLabel": "Default mode",
|
|
"delete": "Delete",
|
|
"electricalSubtitle": "When in doubt, ask your electrician.",
|
|
"electricalTitle": "Electrical",
|
|
"energyMeterHelp": "Additional meter if the charger doesn't have an integrated one.",
|
|
"energyMeterLabel": "Energy meter",
|
|
"estimateLabel": "Interpolate charge level between API updates",
|
|
"maxCurrentHelp": "Must be greater than minimum current.",
|
|
"maxCurrentLabel": "Maximum current",
|
|
"minCurrentHelp": "Only go below 6 A if you know what you're doing.",
|
|
"minCurrentLabel": "Minimum current",
|
|
"noVehicles": "No vehicles are configured.",
|
|
"option": {
|
|
"charging": "Add charging point",
|
|
"heating": "Add heating device"
|
|
},
|
|
"phases1p": "1-phase",
|
|
"phases3p": "3-phase",
|
|
"phasesAutomatic": "Automatic phases",
|
|
"phasesAutomaticHelp": "Your charger supports automatic switching between 1- and 3-phase charging. In the main screen you can adjust phase behaviour while charging.",
|
|
"phasesHelp": "Number of phases connected.",
|
|
"phasesLabel": "Phases",
|
|
"pollIntervalDanger": "Regularly querying the vehicle may drain the vehicle battery. Some vehicle manufacturers may actively prevent charging in this case. Not recommended! Only use this if you're aware of the risks.",
|
|
"pollIntervalHelp": "Time between vehicle API updates. Short intervals may drain the vehicle battery.",
|
|
"pollIntervalLabel": "Update interval",
|
|
"pollModeAlways": "always",
|
|
"pollModeAlwaysHelp": "Always request status updates in regular intervals.",
|
|
"pollModeCharging": "charging",
|
|
"pollModeChargingHelp": "Only request vehicle status updates when charging.",
|
|
"pollModeConnected": "connected",
|
|
"pollModeConnectedHelp": "Update vehicle status in regular intervals when connected.",
|
|
"pollModeLabel": "Update behaviour",
|
|
"priorityHelp": "Higher priority get preferred access to solar surplus.",
|
|
"priorityLabel": "Priority",
|
|
"save": "Save",
|
|
"showAllSettings": "Show all settings",
|
|
"solarBehaviorCustomHelp": "Define your own enable and disable thresholds and delays.",
|
|
"solarBehaviorDefaultHelp": "Start after {enableDelay} of sufficient surplus. Stop when there is not enough surplus for {disableDelay}.",
|
|
"solarBehaviorLabel": "Solar",
|
|
"solarModeCustom": "custom",
|
|
"solarModeMaximum": "maximum solar",
|
|
"thresholdDisableDelayLabel": "Disable delay",
|
|
"thresholdDisableHelpInvalid": "Please use a positive value.",
|
|
"thresholdDisableHelpPositive": "Stop, when more than {power} is used from the grid for {delay}.",
|
|
"thresholdDisableHelpZero": "Stop when minimum required power can't be satisfied for {delay}.",
|
|
"thresholdDisableLabel": "Disable grid power",
|
|
"thresholdEnableDelayLabel": "Enable delay",
|
|
"thresholdEnableHelpInvalid": "Please use a negative value.",
|
|
"thresholdEnableHelpNegative": "Start, when {surplus} surplus is available for {delay}.",
|
|
"thresholdEnableHelpZero": "Start when minimum required power can be satisfied for {delay}.",
|
|
"thresholdEnableLabel": "Enable grid power",
|
|
"titleAdd": {
|
|
"charging": "Add Charging Point",
|
|
"heating": "Add Heating Device",
|
|
"unknown": "Add Charger or Heater"
|
|
},
|
|
"titleEdit": {
|
|
"charging": "Edit Charging Point",
|
|
"heating": "Edit Heating Device",
|
|
"unknown": "Edit Charger or Heater"
|
|
},
|
|
"titleExample": {
|
|
"charging": "Garage, Carport, etc.",
|
|
"heating": "Heatpump, Heater, etc."
|
|
},
|
|
"titleLabel": "Title",
|
|
"vehicleAutoDetection": "auto detection",
|
|
"vehicleHelpAutoDetection": "Automatically selects the most plausible vehicle. Manual override is possible.",
|
|
"vehicleHelpDefault": "Always assume this vehicle is charging here. Auto-detection disabled. Manual override is possible.",
|
|
"vehicleLabel": "Default vehicle",
|
|
"vehiclesTitle": "Vehicles"
|
|
},
|
|
"main": {
|
|
"addAdditional": "Add additional meter",
|
|
"addGrid": "Add grid meter",
|
|
"addLoadpoint": "Add charger or heater",
|
|
"addPvBattery": "Add solar or battery",
|
|
"addTariffs": "Add tariffs",
|
|
"addVehicle": "Add vehicle",
|
|
"configured": "configured",
|
|
"edit": "edit",
|
|
"loadpointRequired": "At least one charging point has to be configured.",
|
|
"name": "Name",
|
|
"title": "Configuration",
|
|
"unconfigured": "not configured",
|
|
"vehicles": "My Vehicles",
|
|
"yaml": "Devices from evcc.yaml are not editable."
|
|
},
|
|
"messaging": {
|
|
"description": "Receive messages about your charging sessions.",
|
|
"title": "Notifications"
|
|
},
|
|
"meter": {
|
|
"cancel": "Cancel",
|
|
"delete": "Delete",
|
|
"generic": "Generic integrations",
|
|
"option": {
|
|
"aux": "Add self-regulating consumer",
|
|
"battery": "Add battery meter",
|
|
"ext": "Add regular consumer",
|
|
"pv": "Add solar meter"
|
|
},
|
|
"save": "Save",
|
|
"specific": "Specific integrations",
|
|
"template": "Manufacturer",
|
|
"titleChoice": "What Do You Want To Add?",
|
|
"titleLabel": "Title",
|
|
"usage": {
|
|
"aux": "Self-regulating consumer",
|
|
"battery": "Battery",
|
|
"charge": "Consumer / Charger",
|
|
"grid": "Grid",
|
|
"label": "Usage",
|
|
"pv": "Production"
|
|
},
|
|
"validateSave": "Validate & save"
|
|
},
|
|
"modbus": {
|
|
"baudrate": "Baud rate",
|
|
"comset": "ComSet",
|
|
"connection": "Modbus connection",
|
|
"connectionHintSerial": "The device is directly connected to evcc via a RS485 interface.",
|
|
"connectionHintTcpip": "The device is addressable from evcc via LAN/Wifi.",
|
|
"connectionValueSerial": "Serial / USB",
|
|
"connectionValueTcpip": "Network",
|
|
"device": "Device name",
|
|
"deviceHint": "Example: /dev/ttyUSB0",
|
|
"host": "IP address or hostname",
|
|
"hostHint": "Example: 192.0.2.2",
|
|
"id": "Modbus ID",
|
|
"port": "Port",
|
|
"protocol": "Modbus protocol",
|
|
"protocolHintRtu": "Connection through a RS485 to Ethernet adapter without protocol translation.",
|
|
"protocolHintTcp": "Device has native LAN/Wifi support or is connected through a RS485 to Ethernet adapter with protocol translation.",
|
|
"protocolValueRtu": "RTU",
|
|
"protocolValueTcp": "TCP"
|
|
},
|
|
"modbusproxy": {
|
|
"add": "Add proxy connection",
|
|
"connection": "Connection #{number}",
|
|
"description": "Some Modbus devices only support a single or very few connections. evcc can act as a proxy, enabling simultaneous access for multiple clients (home automation, scripts, etc.).",
|
|
"device": "Device",
|
|
"option": {
|
|
"deny": "error",
|
|
"false": "no",
|
|
"true": "silent"
|
|
},
|
|
"readonly": {
|
|
"help": {
|
|
"deny": "Write access is blocked with a Modbus error.",
|
|
"false": "Write access is forwarded.",
|
|
"true": "Write access is blocked without response."
|
|
},
|
|
"label": "Readonly"
|
|
},
|
|
"sourcePortHelp": "Port for incoming client connections. Must be available.",
|
|
"title": "Modbus Proxy"
|
|
},
|
|
"mqtt": {
|
|
"authentication": "Authentication",
|
|
"description": "Connect to an MQTT broker to exchange data with other systems on your network.",
|
|
"descriptionClientId": "Author of the messages. If empty `evcc-[rand]` is used.",
|
|
"descriptionTopic": "Leave empty to disable publishing.",
|
|
"labelBroker": "Broker",
|
|
"labelCaCert": "Server certificate (CA)",
|
|
"labelCheckInsecure": "Allow self-signed certificates",
|
|
"labelClientCert": "Client certificate",
|
|
"labelClientId": "Client ID",
|
|
"labelClientKey": "Client key",
|
|
"labelInsecure": "Certificate validation",
|
|
"labelPassword": "Password",
|
|
"labelTopic": "Topic",
|
|
"labelUser": "Username",
|
|
"publishing": "Publishing",
|
|
"title": "MQTT"
|
|
},
|
|
"network": {
|
|
"descriptionHost": "Use .local suffix to enable mDNS. Relevant for discovery of the mobile app and some OCPP chargers.",
|
|
"descriptionPort": "Port for the web interface and API. You'll need to update your browser URL if you change this.",
|
|
"descriptionSchema": "Only affects how URLs are generated. Selecting HTTPS will not enable encryption.",
|
|
"labelHost": "Hostname",
|
|
"labelPort": "Port",
|
|
"labelSchema": "Schema",
|
|
"title": "Network"
|
|
},
|
|
"options": {
|
|
"boolean": {
|
|
"no": "no",
|
|
"yes": "yes"
|
|
},
|
|
"endianness": {
|
|
"big": "big-endian",
|
|
"little": "little-endian"
|
|
},
|
|
"operationMode": {
|
|
"heating": "Heating",
|
|
"standby": "Standby"
|
|
},
|
|
"schema": {
|
|
"http": "HTTP (unencrypted)",
|
|
"https": "HTTPS (encrypted)"
|
|
},
|
|
"status": {
|
|
"A": "A (not connected)",
|
|
"B": "B (connected)",
|
|
"C": "C (charging)"
|
|
}
|
|
},
|
|
"pv": {
|
|
"titleAdd": "Add Solar Meter",
|
|
"titleEdit": "Edit Solar Meter"
|
|
},
|
|
"section": {
|
|
"additionalMeter": "Additional meters",
|
|
"general": "General",
|
|
"grid": "Grid",
|
|
"integrations": "Integrations",
|
|
"loadpoints": "Charging & Heating",
|
|
"meter": "Solar & Battery",
|
|
"system": "System",
|
|
"vehicles": "Vehicles"
|
|
},
|
|
"shm": {
|
|
"cardTitle": "Sunny Home Manager",
|
|
"description": "evcc is equipped with integration for the SMA Sunny Home Manager (SHM) via SEMP protocol. If it is running on the same network, after logging into your Sunny Portal account, you should automatically be offered to add all chargers configured in evcc as newly discovered consumers. Everything should be ready to use immediately, without any adjustments required below.",
|
|
"descriptionDeviceId": "12 characters HEX string. Prefix for all devices (charging point, ..).",
|
|
"descriptionIdPattern": "Identifier pattern",
|
|
"descriptionIds": "In Sunny Portal every consumer device needs a unique identifier. evcc generates a unique identifier based on your hardware. If you migrate evcc to another hardware these identifiers might change. If you want to maintain history you can override the generated identifiers here. Open the SEMP URL (/semp) to check your current identifiers.",
|
|
"descriptionSempUrl": "SEMP URL",
|
|
"descriptionVendorId": "8 characters HEX string. General prefix of all entities. By default evcc will use its own internal vendor ID.",
|
|
"labelDeviceId": "Device ID",
|
|
"labelVendorId": "Vendor ID",
|
|
"title": "SMA Sunny Home Manager"
|
|
},
|
|
"sponsor": {
|
|
"addToken": "Enter token",
|
|
"changeToken": "Change token",
|
|
"description": "The sponsoring model helps us to maintain the project and sustainably build new and exciting features. As a sponsor you get access to all charger implementations.",
|
|
"descriptionToken": "Sponsors find their token on {url}. For getting-started, we offer a {trialToken}.",
|
|
"enterYourToken": "Enter your token",
|
|
"error": "The sponsor token is not valid.",
|
|
"invalid": "invalid",
|
|
"labelToken": "Sponsor token",
|
|
"title": "Sponsorship",
|
|
"tokenRequired": "You must configure a sponsor token before you can create this device.",
|
|
"tokenRequiredFeature": "This feature requires a sponsor token.",
|
|
"tokenRequiredLearnMore": "Learn more.",
|
|
"tokenRequiredShort": "No sponsor token configured.",
|
|
"trialToken": "trial token",
|
|
"viaYaml": "via evcc.yaml",
|
|
"yourToken": "Your token"
|
|
},
|
|
"system": {
|
|
"backupRestore": {
|
|
"backup": {
|
|
"action": "Download backup...",
|
|
"confirmationButton": "Download backup",
|
|
"confirmationText": "Download the database file.",
|
|
"description": "Backup your data to a file. This file can be used to restore your data in case of a system failure.",
|
|
"title": "Backup"
|
|
},
|
|
"cancel": "Cancel",
|
|
"description": "Backup, restore and reset your data. Useful if you want to move your data to another system.",
|
|
"note": "Note: All above actions only affect your database data. The evcc.yaml configuration file remains unchanged.",
|
|
"reset": {
|
|
"action": "Reset...",
|
|
"confirmationButton": "Reset & restart",
|
|
"confirmationText": "This will permanently delete your selected data. Ensure you've downloaded a backup first.",
|
|
"description": "Having problems with configuration and want to start over? Delete all data and start fresh.",
|
|
"sessions": "Charging sessions",
|
|
"sessionsDescription": "Deletes your charging session history.",
|
|
"settings": "Configuration & settings",
|
|
"settingsDescription": "Deletes all configured devices, services, plans, caches, etc.",
|
|
"title": "Reset"
|
|
},
|
|
"restore": {
|
|
"action": "Restore...",
|
|
"confirmationButton": "Restore & restart",
|
|
"confirmationText": "This will overwrite your complete database. Ensure you've downloaded a backup first.",
|
|
"description": "Restore your data from a backup file. This will overwrite all your current data.",
|
|
"labelFile": "Backup file",
|
|
"title": "Restore"
|
|
},
|
|
"title": "Backup & Restore"
|
|
},
|
|
"logs": "Logs",
|
|
"restart": "Restart",
|
|
"restartRequiredDescription": "Please restart to see the effect.",
|
|
"restartRequiredMessage": "Configuration changed.",
|
|
"restartingDescription": "Please wait…",
|
|
"restartingMessage": "Restarting evcc."
|
|
},
|
|
"tariffs": {
|
|
"description": "Define your energy tariffs to calculate the costs of your charging sessions.",
|
|
"title": "Tariffs"
|
|
},
|
|
"telemetry": {
|
|
"description": "Configure data sharing to help improve evcc. Your privacy is important to us and participation is completely optional.",
|
|
"title": "Telemetry"
|
|
},
|
|
"title": {
|
|
"description": "Displayed on main screen and browser tab.",
|
|
"label": "Title",
|
|
"title": "Edit Title"
|
|
},
|
|
"validation": {
|
|
"failed": "failed",
|
|
"label": "Status",
|
|
"running": "Validating…",
|
|
"success": "successful",
|
|
"unknown": "unknown",
|
|
"validate": "validate"
|
|
},
|
|
"vehicle": {
|
|
"cancel": "Cancel",
|
|
"chargingSettings": "Charging settings",
|
|
"defaultMode": "Default mode",
|
|
"defaultModeHelp": "Charging mode when connecting the vehicle.",
|
|
"delete": "Delete",
|
|
"generic": "Other integrations",
|
|
"identifiers": "RFID identifiers",
|
|
"identifiersHelp": "List of RFID strings to identify the vehicle. One entry per line. The current identifier can be found at the respective charging point on the overview page.",
|
|
"maximumCurrent": "Maximum current",
|
|
"maximumCurrentHelp": "Must be greater than minimum current.",
|
|
"maximumPhases": "Maximum phases",
|
|
"maximumPhasesHelp": "How many phases can this vehicle charge with? Used to calculate required minimum solar surplus and plan duration.",
|
|
"minimumCurrent": "Minimum current",
|
|
"minimumCurrentHelp": "Only go below 6A if you know what you're doing.",
|
|
"online": "Vehicles with online API",
|
|
"primary": "Generic integrations",
|
|
"priority": "Priority",
|
|
"priorityHelp": "Higher priority means this vehicle gets preferred access to solar surplus.",
|
|
"save": "Save",
|
|
"scooter": "Scooter",
|
|
"template": "Manufacturer",
|
|
"titleAdd": "Add Vehicle",
|
|
"titleEdit": "Edit Vehicle",
|
|
"validateSave": "Validate & save"
|
|
}
|
|
},
|
|
"footer": {
|
|
"community": {
|
|
"greenEnergy": "Solar",
|
|
"greenEnergySub1": "charged with evcc",
|
|
"greenEnergySub2": "since October 2022",
|
|
"greenShare": "Solar share",
|
|
"greenShareSub1": "power provided by",
|
|
"greenShareSub2": "solar, and battery storage",
|
|
"power": "Charging power",
|
|
"powerSub1": "{activeClients} of {totalClients} participants",
|
|
"powerSub2": "charging…",
|
|
"tabTitle": "Live community"
|
|
},
|
|
"savings": {
|
|
"co2Saved": "{value} saved",
|
|
"co2Title": "CO₂ Emissons",
|
|
"configurePriceCo2": "Learn how to configure price and CO₂ data.",
|
|
"footerLong": "{percent} solar energy",
|
|
"footerShort": "{percent} solar",
|
|
"modalTitle": "Charge Energy Overview",
|
|
"moneySaved": "{value} saved",
|
|
"percentGrid": "{grid} kWh grid",
|
|
"percentSelf": "{self} kWh solar",
|
|
"percentTitle": "Solar Energy",
|
|
"period": {
|
|
"30d": "last 30 days",
|
|
"365d": "last 365 days",
|
|
"thisYear": "this year",
|
|
"total": "all time"
|
|
},
|
|
"periodLabel": "Period:",
|
|
"priceTitle": "Energy Price",
|
|
"referenceGrid": "grid",
|
|
"referenceLabel": "Reference data:",
|
|
"tabTitle": "My data"
|
|
},
|
|
"sponsor": {
|
|
"becomeSponsor": "Become a sponsor",
|
|
"becomeSponsorExtended": "Support us directly to get stickers.",
|
|
"confetti": "Ready for confetti?",
|
|
"confettiPromise": "You get stickers and digital confetti",
|
|
"sticker": "… or evcc stickers?",
|
|
"supportUs": "Our mission is to make solar charging the norm. Help evcc by paying what it is worth to you.",
|
|
"thanks": "Thank you, {sponsor}! Your contribution helps develop evcc further.",
|
|
"titleNoSponsor": "Support us",
|
|
"titleSponsor": "You are a supporter",
|
|
"titleTrial": "Trial mode",
|
|
"titleVictron": "Sponsored by Victron Energy",
|
|
"trial": "You are in trial mode and can use all features. Please consider supporting the project.",
|
|
"victron": "You're using evcc on Victron Energy hardware and have access to all features."
|
|
},
|
|
"telemetry": {
|
|
"optIn": "I want to contribute my data.",
|
|
"optInMoreDetails": "More details {0}.",
|
|
"optInMoreDetailsLink": "here",
|
|
"optInSponsorship": "Sponsoring required."
|
|
},
|
|
"version": {
|
|
"availableLong": "new version available",
|
|
"modalCancel": "Cancel",
|
|
"modalDownload": "Download",
|
|
"modalInstalledVersion": "Installed version",
|
|
"modalNoReleaseNotes": "No release notes available. More info about the new version:",
|
|
"modalTitle": "New version available",
|
|
"modalUpdate": "Install",
|
|
"modalUpdateNow": "Install now",
|
|
"modalUpdateStarted": "Starting the new version of evcc…",
|
|
"modalUpdateStatusStart": "Installation started:"
|
|
}
|
|
},
|
|
"forecast": {
|
|
"co2": {
|
|
"average": "Average",
|
|
"lowestHour": "Cleanest hour",
|
|
"range": "Range"
|
|
},
|
|
"modalTitle": "Forecast",
|
|
"price": {
|
|
"average": "Average",
|
|
"lowestHour": "Cheapest hour",
|
|
"range": "Range"
|
|
},
|
|
"solar": {
|
|
"dayAfterTomorrow": "Day after tomorrow",
|
|
"partly": "partly",
|
|
"remaining": "remaining",
|
|
"today": "Today",
|
|
"tomorrow": "Tomorrow"
|
|
},
|
|
"solarAdjust": "Adjust solar forecast based on real production data{percent}.",
|
|
"type": {
|
|
"co2": "CO₂",
|
|
"price": "Price",
|
|
"solar": "Solar"
|
|
}
|
|
},
|
|
"header": {
|
|
"about": "About",
|
|
"authProviders": {
|
|
"confirmLogout": "Are you sure you want to disconnect {title}?",
|
|
"loggedOut": "Successfully logged out",
|
|
"title": "Authorization Status"
|
|
},
|
|
"blog": "Blog",
|
|
"docs": "Documentation",
|
|
"github": "GitHub",
|
|
"logout": "Logout",
|
|
"nativeSettings": "Change Server",
|
|
"needHelp": "Need Help?",
|
|
"sessions": "Charging Sessions"
|
|
},
|
|
"help": {
|
|
"discussionsButton": "GitHub discussions",
|
|
"documentationButton": "Documentation",
|
|
"issueButton": "Report a problem",
|
|
"issueDescription": "Found a strange or wrong behavior?",
|
|
"logsButton": "View logs",
|
|
"logsDescription": "Check the logs for errors.",
|
|
"modalTitle": "Need help?",
|
|
"primaryActions": "Something does not work the way it supposed to do? These are good places to get help.",
|
|
"restart": {
|
|
"cancel": "Cancel",
|
|
"confirm": "Yes, restart!",
|
|
"description": "Under normal circumstances restarting should not be necessary. Please consider filing a bug if you need to restart evcc on a regular basis.",
|
|
"disclaimer": "Note: evcc will terminate and rely on the operating system to restart the service.",
|
|
"modalTitle": "Are you sure you want to restart?"
|
|
},
|
|
"restartButton": "Restart",
|
|
"restartDescription": "Tried turning it off and on again?",
|
|
"secondaryActions": "Still not able to solve your problem? Here are some more heavy-handed options."
|
|
},
|
|
"issue": {
|
|
"additional": {
|
|
"description": "Include configuration and logs to help us reproduce the issue quickly. We encourage sharing as much as possible. State is usually not needed.",
|
|
"include": "include",
|
|
"lines": "lines",
|
|
"logs": "Logs",
|
|
"logsDescription": "Recent log entries that may help identify the issue.",
|
|
"showDetails": "show details",
|
|
"source": "Source",
|
|
"state": "State",
|
|
"stateDescription": "Complete runtime state including charging point, device, and energy information. Include only if requested.",
|
|
"title": "Additional Information",
|
|
"uiConfig": "Configuration (UI)",
|
|
"uiConfigDescription": "Configuration settings made through the web interface.",
|
|
"yamlConfig": "Configuration (YAML)",
|
|
"yamlConfigDescription": "Your complete configuration file."
|
|
},
|
|
"additionalContext": "Additional context",
|
|
"additionalContextPlaceholder": "Any additional information that might be helpful...\n- Configuration details\n- What you tried\n- Environment details",
|
|
"createButtonDiscussion": "Start GitHub Discussion...",
|
|
"createButtonIssue": "Create GitHub Issue...",
|
|
"description": "Your installation is not working as expected? Use this page to get help or report issues. Provide enough detail to help us understand and reproduce the problem, while keeping your description concise, clear and easy to follow.",
|
|
"helpType": {
|
|
"discussion": "Need help with my setup",
|
|
"discussionDescription": "Community discussions provide answers.",
|
|
"issue": "Found a bug",
|
|
"issueDescription": "I'm certain something is broken and needs to be fixed.",
|
|
"title": "What problem are we talking about?"
|
|
},
|
|
"issueDescription": "Description",
|
|
"issueTitle": "Title",
|
|
"stepsToReproduce": "Steps to reproduce",
|
|
"subTitleDiscussion": "Describe your problem",
|
|
"subTitleIssue": "Describe the issue",
|
|
"summary": {
|
|
"confirmationButtonDiscussion": "Start GitHub Discussion",
|
|
"confirmationButtonIssue": "Create GitHub Issue",
|
|
"copied": "Copied!",
|
|
"copyButton": "Copy additional information",
|
|
"instructions": "Due to GitHub's URL size limitations, this is a two-step process:",
|
|
"singleStepDescription": "Click the button below to open GitHub with a pre-filled form containing your problem details. Sensitive data has been automatically redacted, but please double-check before sharing.",
|
|
"step1Description": "Click the button below to create a basic GitHub entry with your title, description, and details.",
|
|
"step2Description": "After creating the entry, return here to copy the additional information below and paste it into your GitHub form. Sensitive data has been redacted, but please double-check before sharing.",
|
|
"stepOneDiscussion": "Step 1: Create basic discussion",
|
|
"stepOneIssue": "Step 1: Create basic issue",
|
|
"stepTwo": "Step 2: Copy additional information",
|
|
"title": "GitHub Problem Summary"
|
|
},
|
|
"title": "Report a problem",
|
|
"version": "Version"
|
|
},
|
|
"log": {
|
|
"areaLabel": "Filter by area",
|
|
"areas": "All areas",
|
|
"download": "Download complete log",
|
|
"levelLabel": "Filter by log level",
|
|
"nAreas": "{count} areas",
|
|
"noResults": "No matching log entries.",
|
|
"search": "Search",
|
|
"selectAll": "select all",
|
|
"showAll": "Show all entries",
|
|
"title": "Logs",
|
|
"update": "Auto update"
|
|
},
|
|
"loginModal": {
|
|
"cancel": "Cancel",
|
|
"demoMode": "Login is not supported in demo mode.",
|
|
"iframeHint": "Open evcc in a new tab.",
|
|
"iframeIssue": "Your password is correct, but your browser seems to have dropped the authentication cookie. This can happen if you run evcc in an iframe via HTTP.",
|
|
"invalid": "Password is invalid.",
|
|
"login": "Login",
|
|
"password": "Administrator Password",
|
|
"reset": "Reset password?",
|
|
"title": "Authentication"
|
|
},
|
|
"main": {
|
|
"chargingPlan": {
|
|
"active": "Active",
|
|
"addRepeatingPlan": "Add repeating plan",
|
|
"arrivalTab": "Arrival",
|
|
"day": "Day",
|
|
"departureTab": "Departure",
|
|
"goal": "Charging goal",
|
|
"modalTitle": "Charging Plan",
|
|
"none": "none",
|
|
"planNumber": "Plan {number}",
|
|
"preconditionDescription": "Charge {duration} before departure for battery preconditioning.",
|
|
"preconditionLong": "Late Charging",
|
|
"preconditionOptionAll": "everything",
|
|
"preconditionOptionNo": "no",
|
|
"preconditionShort": "Late",
|
|
"remove": "Remove",
|
|
"repeating": "repeating",
|
|
"repeatingPlans": "Repeating plans",
|
|
"selectAll": "Select all",
|
|
"time": "Time",
|
|
"title": "Plan",
|
|
"titleMinSoc": "Min charge",
|
|
"titleTargetCharge": "Departure",
|
|
"unsavedChanges": "There are unsaved changes. Apply now?",
|
|
"update": "Apply",
|
|
"weekdays": "Days"
|
|
},
|
|
"energyflow": {
|
|
"battery": "Battery",
|
|
"batteryCharge": "Battery charging",
|
|
"batteryDischarge": "Battery discharging",
|
|
"batteryGridChargeActive": "grid charging active",
|
|
"batteryGridChargeLimit": "grid charging when",
|
|
"batteryHold": "Battery (locked)",
|
|
"batteryTooltip": "{energy} of {total} ({soc})",
|
|
"forecastTooltip": "forecast: remaining solar production today",
|
|
"gridImport": "Grid use",
|
|
"homePower": "Consumption",
|
|
"loadpoints": "Charger| Charger | {count} chargers",
|
|
"loadpointsLimit": "{limit} limit",
|
|
"noEnergy": "No meter data",
|
|
"pv": "Solar system",
|
|
"pvExport": "Grid export",
|
|
"pvProduction": "Production",
|
|
"selfConsumption": "Self-consumption"
|
|
},
|
|
"heatingStatus": {
|
|
"charging": "Heating…",
|
|
"connected": "Standby.",
|
|
"vehicleLimit": "Heater limit",
|
|
"waitForVehicle": "Ready. Waiting for heater…"
|
|
},
|
|
"hemsWarning": {
|
|
"description": "Reduced charging to not exceed {limit}.",
|
|
"title": "External limit:"
|
|
},
|
|
"loadpoint": {
|
|
"avgPrice": "⌀ Price",
|
|
"charged": "Charged",
|
|
"co2": "⌀ CO₂",
|
|
"duration": "Duration",
|
|
"fallbackName": "Charging point",
|
|
"finished": "Finish time",
|
|
"power": "Power",
|
|
"price": "Cost",
|
|
"remaining": "Remaining",
|
|
"remoteDisabledHard": "{source}: turned off",
|
|
"remoteDisabledSoft": "{source}: turned off adaptive solar-charging",
|
|
"solar": "Solar"
|
|
},
|
|
"loadpointSettings": {
|
|
"batteryBoost": {
|
|
"description": "Fast charge from home battery.",
|
|
"label": "Battery Boost",
|
|
"mode": "Only available in solar and min+solar mode.",
|
|
"once": "Boost active for this charging session."
|
|
},
|
|
"batteryUsage": "Home Battery",
|
|
"currents": "Charging Current",
|
|
"default": "default",
|
|
"disclaimerHint": "Note:",
|
|
"limitSoc": {
|
|
"description": "Charging limit that is used when this vehicle is connected.",
|
|
"label": "Default limit"
|
|
},
|
|
"maxCurrent": {
|
|
"label": "Max. Current"
|
|
},
|
|
"minCurrent": {
|
|
"label": "Min. Current"
|
|
},
|
|
"minSoc": {
|
|
"description": "The vehicle gets „fast” charged to {0} in solar mode. Then continues with solar surplus. Useful to ensure a minimum range even for darker days.",
|
|
"label": "Min. charge %"
|
|
},
|
|
"onlyForSocBasedCharging": "These options are only available for vehicles with known charging level.",
|
|
"phasesConfigured": {
|
|
"label": "Phases",
|
|
"no1p3pSupport": "How is your charger connected?",
|
|
"phases_0": "auto-switching",
|
|
"phases_1": "1 phase",
|
|
"phases_1_hint": "({min} to {max})",
|
|
"phases_3": "3 phase",
|
|
"phases_3_hint": "({min} to {max})"
|
|
},
|
|
"smartCostCheap": "Cheap Grid Charging",
|
|
"smartCostClean": "Clean Grid Charging",
|
|
"title": "Settings {0}",
|
|
"vehicle": "Vehicle"
|
|
},
|
|
"mode": {
|
|
"minpv": "Min+Solar",
|
|
"now": "Fast",
|
|
"off": "Off",
|
|
"pv": "Solar",
|
|
"smart": "Smart"
|
|
},
|
|
"provider": {
|
|
"login": "log in",
|
|
"logout": "log out"
|
|
},
|
|
"startConfiguration": "Let's start configuration",
|
|
"targetCharge": {
|
|
"activate": "Activate",
|
|
"co2Limit": "CO₂ limit of {co2}",
|
|
"costLimitIgnore": "The configured {limit} will be ignored during this period.",
|
|
"currentPlan": "Active plan",
|
|
"descriptionEnergy": "Until when should {targetEnergy} be loaded into the vehicle?",
|
|
"descriptionSoc": "When should the vehicle be charged to {targetSoc}?",
|
|
"goalReached": "Goal already reached",
|
|
"inactiveLabel": "Target time",
|
|
"nextPlan": "Next plan",
|
|
"notReachableInTime": "Goal will be reached {overrun} later.",
|
|
"onlyInPvMode": "Charging plan only works in solar mode.",
|
|
"planDuration": "Charging time",
|
|
"planPeriodLabel": "Period",
|
|
"planPeriodValue": "{start} to {end}",
|
|
"planUnknown": "not known yet",
|
|
"preview": "Preview plan",
|
|
"priceLimit": "price limit of {price}",
|
|
"remove": "Remove",
|
|
"setTargetTime": "none",
|
|
"targetIsAboveLimit": "The configured charging limit of {limit} will be ignored during this period.",
|
|
"targetIsAboveVehicleLimit": "Vehicle limit is below charging goal.",
|
|
"targetIsInThePast": "Pick a time in the future, Marty.",
|
|
"targetIsTooFarInTheFuture": "We will adjust the plan as soon as we know more about the future.",
|
|
"title": "Target Time",
|
|
"today": "today",
|
|
"tomorrow": "tomorrow",
|
|
"update": "Update",
|
|
"vehicleCapacityDocs": "Learn how to configure it.",
|
|
"vehicleCapacityRequired": "The vehicle battery capacity is required to estimate the charging time."
|
|
},
|
|
"targetChargePlan": {
|
|
"chargeDuration": "Charging time",
|
|
"co2Label": "CO₂ emission ⌀",
|
|
"priceLabel": "Energy price",
|
|
"timeRange": "{day} {range} h",
|
|
"unknownPrice": "still unknown"
|
|
},
|
|
"targetEnergy": {
|
|
"label": "Limit",
|
|
"noLimit": "none"
|
|
},
|
|
"vehicle": {
|
|
"addVehicle": "Add vehicle",
|
|
"changeVehicle": "Change vehicle",
|
|
"detectionActive": "Detecting vehicle…",
|
|
"fallbackName": "Vehicle",
|
|
"moreActions": "More actions",
|
|
"none": "No vehicle",
|
|
"notReachable": "Vehicle was not reachable. Try restarting evcc.",
|
|
"targetSoc": "Limit",
|
|
"temp": "Temp.",
|
|
"tempLimit": "Temp. limit",
|
|
"unknown": "Guest vehicle",
|
|
"vehicleSoc": "Charge"
|
|
},
|
|
"vehicleStatus": {
|
|
"awaitingAuthorization": "Waiting for authorization.",
|
|
"batteryBoost": "Battery boost active.",
|
|
"charging": "Charging…",
|
|
"cheapEnergyCharging": "Cheap energy available.",
|
|
"cheapEnergyNextStart": "Cheap energy in {duration}.",
|
|
"cheapEnergySet": "Price limit set.",
|
|
"cleanEnergyCharging": "Clean energy available.",
|
|
"cleanEnergyNextStart": "Clean energy in {duration}.",
|
|
"cleanEnergySet": "CO₂ limit set.",
|
|
"climating": "Pre-conditioning detected.",
|
|
"connected": "Connected.",
|
|
"disconnectRequired": "Session terminated. Please reconnect.",
|
|
"disconnected": "Disconnected.",
|
|
"feedinPriorityNextStart": "High feed-in rates start in {duration}.",
|
|
"feedinPriorityPausing": "Solar charging paused to maximize feed-in.",
|
|
"finished": "Finished.",
|
|
"minCharge": "Minimum charging to {soc}.",
|
|
"pvDisable": "Not enough surplus. Pausing soon.",
|
|
"pvEnable": "Surplus available. Starting soon.",
|
|
"scale1p": "Reducing to 1-phase charging soon.",
|
|
"scale3p": "Increasing to 3-phase charging soon.",
|
|
"targetChargeActive": "Charging plan active. Estimated finish in {duration}.",
|
|
"targetChargePlanned": "Charging plan starts in {duration}.",
|
|
"targetChargeWaitForVehicle": "Charging plan ready. Waiting for vehicle…",
|
|
"vehicleLimit": "Vehicle limit",
|
|
"vehicleLimitReached": "Vehicle limit reached.",
|
|
"waitForVehicle": "Ready. Waiting for vehicle…",
|
|
"welcome": "Short initial charge to confirm connection."
|
|
},
|
|
"vehicles": "Parking",
|
|
"welcome": "Hello aboard!"
|
|
},
|
|
"notifications": {
|
|
"dismissAll": "Dismiss all",
|
|
"logs": "View full logs",
|
|
"modalTitle": "Notifications"
|
|
},
|
|
"offline": {
|
|
"configurationError": "Error during startup. Check your configuration and restart.",
|
|
"message": "Not connected to a server.",
|
|
"restart": "Restart",
|
|
"restartNeeded": "Required to apply changes.",
|
|
"restarting": "Server will be back in a moment.",
|
|
"starting": "Starting server..."
|
|
},
|
|
"passwordModal": {
|
|
"description": "Set a password to protect the configuration settings. Using the main screen is still possible without login.",
|
|
"empty": "Password should not be empty",
|
|
"error": "Error: ",
|
|
"labelCurrent": "Current password",
|
|
"labelNew": "New password",
|
|
"labelRepeat": "Repeat password",
|
|
"newPassword": "Create password",
|
|
"noMatch": "Passwords do not match",
|
|
"titleNew": "Set Administrator Password",
|
|
"titleUpdate": "Update Administrator Password",
|
|
"updatePassword": "Update password"
|
|
},
|
|
"session": {
|
|
"cancel": "Cancel",
|
|
"co2": "CO₂",
|
|
"date": "Period",
|
|
"delete": "Delete",
|
|
"finished": "Finished",
|
|
"meter": "Meter",
|
|
"meterstart": "Meter start",
|
|
"meterstop": "Meter stop",
|
|
"odometer": "Mileage",
|
|
"price": "Price",
|
|
"started": "Started",
|
|
"title": "Charging Session"
|
|
},
|
|
"sessions": {
|
|
"avgPower": "⌀ Power",
|
|
"avgPrice": "⌀ Price",
|
|
"chargeDuration": "Duration",
|
|
"chartTitle": {
|
|
"avgCo2ByGroup": "⌀ CO₂ {byGroup}",
|
|
"avgPriceByGroup": "⌀ Price {byGroup}",
|
|
"byGroupLoadpoint": "by Charging Point",
|
|
"byGroupVehicle": "by Vehicle",
|
|
"energy": "Charged Energy",
|
|
"energyGrouped": "Solar vs. Grid Energy",
|
|
"energyGroupedByGroup": "Energy {byGroup}",
|
|
"energySubSolar": "{value} solar",
|
|
"energySubTotal": "{value} total",
|
|
"groupedCo2ByGroup": "CO₂-Amount {byGroup}",
|
|
"groupedPriceByGroup": "Total Cost {byGroup}",
|
|
"historyCo2": "CO₂-Emissions",
|
|
"historyCo2Sub": "{value} total",
|
|
"historyPrice": "Charging Costs",
|
|
"historyPriceSub": "{value} total",
|
|
"solar": "Solar Share Over Year",
|
|
"solarByGroup": "Solar Share {byGroup}"
|
|
},
|
|
"co2": "⌀ CO₂",
|
|
"csv": {
|
|
"chargedenergy": "Energy (kWh)",
|
|
"chargeduration": "Duration",
|
|
"co2perkwh": "CO₂/kWh",
|
|
"created": "Created",
|
|
"finished": "Finished",
|
|
"identifier": "Identifier",
|
|
"loadpoint": "Charging point",
|
|
"meterstart": "Meter start (kWh)",
|
|
"meterstop": "Meter stop (kWh)",
|
|
"odometer": "Mileage (km)",
|
|
"price": "Price",
|
|
"priceperkwh": "Price/kWh",
|
|
"solarpercentage": "Solar (%)",
|
|
"vehicle": "Vehicle"
|
|
},
|
|
"csvPeriod": "Download {period} CSV",
|
|
"csvTotal": "Download total CSV",
|
|
"date": "Start",
|
|
"energy": "Charged",
|
|
"filter": {
|
|
"allLoadpoints": "all charging points",
|
|
"allVehicles": "all vehicles",
|
|
"filter": "Filter"
|
|
},
|
|
"group": {
|
|
"co2": "Emissions",
|
|
"grid": "Grid",
|
|
"price": "Price",
|
|
"self": "Solar"
|
|
},
|
|
"groupBy": {
|
|
"loadpoint": "Charging point",
|
|
"none": "Total",
|
|
"vehicle": "Vehicle"
|
|
},
|
|
"loadpoint": "Charging point",
|
|
"noData": "No charging sessions this month.",
|
|
"overview": "Overview",
|
|
"period": {
|
|
"month": "Month",
|
|
"total": "Total",
|
|
"year": "Year"
|
|
},
|
|
"price": "Cost",
|
|
"reallyDelete": "Do you really want to delete this session?",
|
|
"showIndividualEntries": "Show individual sessions",
|
|
"solar": "Solar",
|
|
"title": "Charging Sessions",
|
|
"total": "Total",
|
|
"type": {
|
|
"co2": "CO₂",
|
|
"price": "Price",
|
|
"solar": "Solar"
|
|
},
|
|
"vehicle": "Vehicle"
|
|
},
|
|
"settings": {
|
|
"deviceInfo": "Settings you make in this dialog only affect this device.",
|
|
"fullscreen": {
|
|
"enter": "Enter fullscreen",
|
|
"exit": "Exit fullscreen",
|
|
"label": "Fullscreen"
|
|
},
|
|
"hiddenFeatures": {
|
|
"label": "Experimental",
|
|
"value": "Show experimental UI features."
|
|
},
|
|
"language": {
|
|
"auto": "Automatic",
|
|
"label": "Language"
|
|
},
|
|
"loadpoints": {
|
|
"help": "Change order and visibility for the UI.",
|
|
"hide": "Hide {title}",
|
|
"label": "Charging points",
|
|
"show": "Show {title}"
|
|
},
|
|
"sponsorToken": {
|
|
"expires": "You sponsor token expires {inXDays}. {getNewToken} and update it here.",
|
|
"getNew": "Grab a fresh one",
|
|
"hint": "Note: We will automate this in the future."
|
|
},
|
|
"telemetry": {
|
|
"label": "Telemetry"
|
|
},
|
|
"theme": {
|
|
"auto": "system",
|
|
"dark": "dark",
|
|
"label": "Design",
|
|
"light": "light"
|
|
},
|
|
"time": {
|
|
"12h": "12h",
|
|
"24h": "24h",
|
|
"label": "Time format"
|
|
},
|
|
"title": "User Interface",
|
|
"unit": {
|
|
"km": "km",
|
|
"label": "Units",
|
|
"mi": "miles"
|
|
}
|
|
},
|
|
"smartCost": {
|
|
"activeHours": "{active} of {total}",
|
|
"activeHoursLabel": "Active time",
|
|
"applyToAll": "Apply everywhere?",
|
|
"batteryDescription": "Charges the home battery with energy from the grid.",
|
|
"cheapTitle": "Cheap Grid Charging",
|
|
"cleanTitle": "Clean Grid Charging",
|
|
"co2Label": "CO₂ emission",
|
|
"co2Limit": "CO₂ limit",
|
|
"enable": "Enable limit",
|
|
"loadpointDescription": "Enables temporary fast-charging in solar mode.",
|
|
"modalTitle": "Smart Grid Charging",
|
|
"none": "none",
|
|
"priceLabel": "Energy price",
|
|
"priceLimit": "Price limit",
|
|
"resetAction": "Remove limit",
|
|
"resetWarning": "There is no dynamic grid price or CO₂-source configured. However, there is still a limit of {limit}. Clean up your configuration?",
|
|
"saved": "Saved."
|
|
},
|
|
"smartFeedInPriority": {
|
|
"activeHoursLabel": "Paused time",
|
|
"description": "Pauses charging during high prices to prioritize profitable grid feed-in.",
|
|
"priceLabel": "Feed-in rate",
|
|
"priceLimit": "Feed-in limit",
|
|
"resetWarning": "There is no dynamic feed-in tariff configured. However, there is still a limit of {limit}. Clean up your configuration?",
|
|
"title": "Feed-in Priority"
|
|
},
|
|
"startupError": {
|
|
"configFile": "Configuration file used:",
|
|
"configuration": "Config",
|
|
"description": "Please check your configuration file. If the error message does not help, check out the {0}.",
|
|
"discussions": "GitHub Discussions",
|
|
"editConfiguration": "Edit configuration",
|
|
"fixAndRestart": "Please fix the problem and restart the server.",
|
|
"hint": "Note: It could also be you have a faulty device (inverter, meter, …). Check your network connections.",
|
|
"lineError": "Error in {0}.",
|
|
"lineErrorLink": "line {0}",
|
|
"restartButton": "Restart",
|
|
"title": "Startup Error"
|
|
}
|
|
}
|